Unopiu - Curved self-supporting Solaire pergola

Construction: Galvanized and powder-coated iron
Color tone: Dark gray with graphite shimmer

Anchoring in the ground:
The producer recommends embedding the supports in concrete for maximum stability. Depending on the soil conditions, special ground plates can alternatively be used.

Supplementary accessories (optional):
1. Ground anchoring plates:
Single fastening disc per support, equipped with three expansion dowels (10 mm diameter)
2. Rain protection cover: Mixed fabric made of 71% PVC and 29% polyester, including fastening elements; designed exclusively for the arched pergola variant
3. Bamboo pole cover: Set of bamboo rods with varying cross-sections (1-2 cm), connected by stainless steel wire, mounting material included
4. Extension modules: 186 cm in width

Installation of the optional bamboo pole cover:
The bamboo mats must be individually adapted to the pergola structure. Overhanging bamboo rods should be trimmed, and the mats should be laid partially overlapping to ensure a seamless cover.

Note on the waterproof cover:
This tarp is suitable only for the curved models. In the case of the linear pergola variant, adequate water drainage cannot be ensured due to the flat roof surface.

Assembly: Professional installation is necessary.

Solaire Basic Model Curved:
· W 376 x D 240 cm
· W 376 x D 340 cm
Solaire Basic Model Curved + Single Extension:
· W 562 x D 240 cm
· W 562 x D 340 cm
Solaire Basic Model Curved + 2 Extensions:
· W 748 x D 240 cm
· W 748 x D 340 cm
Post Dimensions: Ø 3.3 cm x H 250 cm (Posts can be shortened)

Contact Form

Send us the corresponding proof and we will get back to you with a separate offer during our business hours.

The prerequisite is the stock availability.